Swage Turnbuckle Hardware Tensioner 2″ Barrel w/ LAG Screw for 1/8″ Cable Rail

Description

Swage Turnbuckle Hardware Tensioner 2″ Barrel w/ LAG Screw for 1/8″ Cable
Swage Turnbuckle Hardware Tensioner 2″ Barrel with Lag Screw are T316 “marine grade” stainless steel attach to 1/8” diameter cable WITH the use of a crimper or a hand swaging tool. Our stainless is suitable for outdoor or indoor and has an excellent shine and radiance to it. Looks much nicer than galvanized and holds up against corrosion. Perfect for installation on exterior decks, marine rigging, or interior applications.
Pair these with one of our LUX Terminals or use a turnbuckle / tensioner on both ends for longer runs or runs with turns in them. We recommend 1/8″ cable for indoor or outdoor projects because it allows for better scenic viewing while still passing building code in most areas.
Almost half the size of our larger design! No one opens a 4″ barrel all the way up. This is a clean minimalist design that will meet most every cable railing needs. Consider using 2 tensioners for longer runs or runs with bends in it. Please reach out with any questions you may have or to go over you project.
Dimensions & Weight
– Total Length Closed: 4.65″
– Total Length Open: 6 1/4″
– Swaging Section: 1.16″
– Barrel Length: 2″
– Lag Screw: 1″ x 0.23″
– Weight: 0.10 lb
Those who have purchased this turnbuckle hardware tensioner also purchased the following items from us
– 1/8″ Stainless Steel Cable > 100ft, 500ft, 1000ft
– A Cable Cutting & Swaging Tool > 16 Ton Hydraulic Swaging Tool, 24″ Cutting & Cable Swaging Tool, Cable Cutter Tool
– Stainless Steel Spray Cleaner & Protectant > CitriSurf 77 Plus
Please feel free to Contact Us should you have any questions or just for a few tips & tricks!