Myron L EP-10 Multi Range Analog Conductivity Meter

Description

DESCRIPTION
No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life. Myron L Company has two proven ways to measure such impurities. Our DS Meters? provide fast, accurate, on-the-spot measurements of Total Dissolved Solids (TDS) or Conductivity. pDS Meters? test Conductivity or TDS plus pH. Readings from their highly stable circuitry help assure product quality, prevent equipment damage and verify in-line instrumentation in a wide range of applications, some of which are listed above.
RELIABILITY BUILT IN
Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The user-replaceable pH electrode features a chemical-resistant, porous liquid junction.
UNIQUE FIELD-TESTED DESIGN
Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world. They?re lightweight and compact, yet Myron L?s DS and pDS Meters are also tough, with rugged, taut-band meter movements. Put our meters to the test. Even after years of rough field service, they?ll surpass your expectations of accuracy, reliability and simplicity.
Myron L EP-10 Multi Range Analog Conductivity Meter Ranges: 0-10, 100, 1000, 10,000 µM/µS
SPECIFICATIONS
Ranges: Conductivity
pH
1, 3, 4 or 5 depending on model
2-12 pH (pDS Meters only)
Readout
2½ in. taut-band shock resistant meter
Units of Measure*
Choice of parts per million (ppm) TDS
or micromhos (µM)/microsiemens (µS)
conductivity
Accuracy: Conductivity
pH
±2% full scale
±0.2 pH units
Repeatability
Compensation
Automatic (to 25°C/77ºF) for conductivity
samples between 10-71°C/50-160°F
Range (s):
0-10
0-100
0-1000
0-10,000
Measured
µM
Recommended NIST Standard Solutions: (All pDS Models Also Use 4, 7, 10 pH Buffers)
Key
K,M,O
Calibration
Controls
Conductivity
pH Zero and pH Gain
Electrodes (built-in)
Conductivity: Never need replatinizing
pH: KCl gel-filled, field replaceable
Cell Cup
Chip and crack resistant polyethylene
Circuitry
Very stable; requires minimal
recalibration
Power
One 9 volt battery supplied;
Battery Life: >2000 tests/1 year
Dimensions
3.4 W x 4.5 D x 4.0 H in./
86 W x 114 D x 102 H mm
Weight
1 lb./0,45 kg