-40%

Battery Monitor 50A 100A 350A Caravan RV Motorhome lithium iron lead-acid 999 AH

$ 15.04

Availability: 602 in stock
  • Condition: New
  • Herstellernummer: nicht zutreffend
  • Type::: monitor
  • MPN: Does not apply
  • Marke: Markenlos
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • UPC: Does not apply
  • Refund will be given as: Money Back
  • Marque: - Sans marque/Générique -
  • EAN: Does not apply
  • Numéro de pièce fabricant: Non applicable
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: China
  • Restocking Fee: No
  • Marca: - Senza marca/Generico -
  • Custom Bundle: No
  • Item must be returned within: 60 Days

    Description

    Home
    Electronic Component
    Chips
    Sensor
    Arduino Module
    Raspberry Pi
    Battery Monitor 50A 100A 350A Caravan RV Motorhome lithium iron lead-acid 999 AH
    Popular
    Popular
    Product Introduction
    Description:
    TR16 is a kind of high precision current type battery capacity tester (also known as coulometer), which can test the voltage, current and capacity of battery to help users know the state of battery in time.
    TR16 have memory function. It is suitable for mobile and portable equipments, e-bike, balance cars, cleaning machines, instruments, ups and so on.
    TR16 is suitable for lithium batteries, lithium iron phosphate batteries, lead-acid batteries and nickel-metal hydride batteries which working voltage is from 8V to 80V.
    Attention:
    Please connect as shown strictly. The sampler must be connected to the negative circuit, it is forbidden to connect to the positive circuit. If you want to extend the shielded wire, you must use 4 lines of same specification.
    Install:
    First, open a round holes of 54.5mm on the panel of the equipment.
    Then install the coulometer from the front of the panel.
    Finally, tighten the bracket on the back.
    As shown below:
    Using steps:
    1. Connect and check the current: Power on after complete the connection as shown, the screen should display capacity percentage. If the screen has no response, please check the connection. Then charge or discharge the battery, and check whether the display current is equal to the actual current. If the deviation is large please check the connection.
    2. Capacity reset: On first use, the percentage and capacity are not the actual value, you should reset the capacity: discharge the battery totally and hold the"V/△" key for 3 seconds to set the capacity zero or charge the battery fully and hold the"%/△" key for 3 seconds to set the capacity full. And it doesn't need to do this again later, except replace the battery.
    Colour: black
    Material: plastic
    Specification: 50/100/350A
    Package include:
    1x 50/100/350A Battery Tester
    1x Sampler
    1x Shielded wire
    Parameter
    Min
    Type
    Max
    Unit
    Working vltage
    8.0
    80.0
    V
    Working consumption
    10.0
    12.0
    mA
    Standby consumption
    0.5
    0.6
    mA
    Sleep consumption
    50
    60
    uA
    Voltage accuracy
    ± 1.0
    %
    Current accuracy
    ± 1.0
    %
    Capacity accuracy
    ± 1.0
    %
    Backlight on current (50A)
    30.0
    60.0
    mA
    Backlight on current (>50A)
    80.0
    120.0
    mA
    Preset capacity value
    0.1
    999
    Ah
    Current of 50A sampler
    0.0
    50.0
    75.0
    A
    Current of 100A sampler
    0.0
    100.0
    150.0
    A
    Current of 350A sampler
    0.0
    350.0
    400.0
    A
    Temperature range
    0
    20
    35

    Weight
    g
    Size
    ø59*20
    mm
    Payment
    Shipping
    Refund
    Payment
    We accept PayPal only.
    But we only
    Accept
    your
    Ebay Address
    ,Please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    Shipping
    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    Refund
    All package need to
    wait 30 days
    (US only n
    eed 7-10 days)
    ,
    Please take care it.Less than 30 days,we can't take a refund
    .
    If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    Home
    Electronic Component
    Chips
    Sensor
    Arduino Module
    Raspberry Pi
    Battery Monitor 50A 100A 350A Caravan RV Motorhome lithium iron lead-acid 999 AH
    Product Introduction
    Description:
    TR16 is a kind of high precision current type battery capacity tester (also known as coulometer), which can test the voltage, current and capacity of battery to help users know the state of battery in time.
    TR16 have memory function. It is suitable for mobile and portable equipments, e-bike, balance cars, cleaning machines, instruments, ups and so on.
    TR16 is suitable for lithium batteries, lithium iron phosphate batteries, lead-acid batteries and nickel-metal hydride batteries which working voltage is from 8V to 80V.
    Attention:
    Please connect as shown strictly. The sampler must be connected to the negative circuit, it is forbidden to connect to the positive circuit. If you want to extend the shielded wire, you must use 4 lines of same specification.
    Install:
    First, open a round holes of 54.5mm on the panel of the equipment.
    Then install the coulometer from the front of the panel.
    Finally, tighten the bracket on the back.
    As shown below:
    Using steps:
    1. Connect and check the current: Power on after complete the connection as shown, the screen should display capacity percentage. If the screen has no response, please check the connection. Then charge or discharge the battery, and check whether the display current is equal to the actual current. If the deviation is large please check the connection.
    2. Capacity reset: On first use, the percentage and capacity are not the actual value, you should reset the capacity: discharge the battery totally and hold the"V/△" key for 3 seconds to set the capacity zero or charge the battery fully and hold the"%/△" key for 3 seconds to set the capacity full. And it doesn't need to do this again later, except replace the battery.
    Colour: black
    Material: plastic
    Specification: 50/100/350A
    Package include:
    1x 50/100/350A Battery Tester
    1x Sampler
    1x Shielded wire
    Parameter
    Min
    Type
    Max
    Unit
    Working vltage
    8.0
    80.0
    V
    Working consumption
    10.0
    12.0
    mA
    Standby consumption
    0.5
    0.6
    mA
    Sleep consumption
    50
    60
    uA
    Voltage accuracy
    ± 1.0
    %
    Current accuracy
    ± 1.0
    %
    Capacity accuracy
    ± 1.0
    %
    Backlight on current (50A)
    30.0
    60.0
    mA
    Backlight on current (>50A)
    80.0
    120.0
    mA
    Preset capacity value
    0.1
    999
    Ah
    Current of 50A sampler
    0.0
    50.0
    75.0
    A
    Current of 100A sampler
    0.0
    100.0
    150.0
    A
    Current of 350A sampler
    0.0
    350.0
    400.0
    A
    Temperature range
    0
    20
    35

    Weight
    g
    Size
    ø59*20
    mm
    Payment
    Shipping
    Refund
    Payment
    We accept PayPal only.
    But we only
    Accept
    your
    Ebay Address
    ,Please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    Shipping
    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    Refund
    All package need to
    wait 30 days
    (US only n
    eed 7-10 days)
    ,
    Please take care it.Less than 30 days,we can't take a refund
    .
    If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.