1/8" T316 Stainless Steel Cable Railing Hardware System Kit for Wood Posts 80Pcs

Description

Product Description:
-T316 stainless steel material, anti-rust, waterproof, anti-corrosion, marine grade, suitable for indoor and outdoor use
-With right and left threads
-Designed for use with 1/8" OD stainless steel cables
-Has excellent rust and corrosion resistance
-Perfect match with hydraulic crimping tools
-Threaded screws are specially designed for timber/wooden posts
-Suitable for outdoor or indoor use
Features:
* Brand new deck railing design, clean and elegant. The cable railing kit includes 40 left-handed, 40 right-handed lag screws , 1 drill bits
and 1 multi-function wrench.
Stainless steel T316 material, anti-rust, waterproof, anti-corrosion, marine grade, suitable for indoor and outdoor use.
*This deck railing hardware is suitable for the 1/8" OD cable of the railing system. The threaded screw is designed for wood/wood poles. It rotates the wire rope in the same direction and solves the problem of twisting the attached line. No left product & right will This will cause you trouble and may damage the cable.
*The length of the cable should be 1-1/2" shorter than the wood surface distance; if you want to DIY a high-quality cable railing system, the standard 1/8" (OD) cable is recommended to use T316-stainless steel.
*The lag screws can be drilled into the wood to adjust the tightness without the need for additional turnbuckles or tensioners. Cable railing systems for decks and stairs are not only simple but also will not block your view. A hydraulic crimper is required to connect the cable to the lag screw.
*Through the design of the left and right hand threads, it can of course be used to adjust the tension of the attached cable, so there is no need for turnbuckles in the railing system. And this kind of cable railing will not easily loosen or be damaged.
installation steps:
step 1:
Cut and check the length of your cable, the cable length is 1.5 inches shorter than the usually recommended column edge distance;
Step 2:
Connect the cable to the lag screw through a hydraulic crimp; install a right-hand thread on one end, and a left-hand thread lag screw on the other end;
Step 3:
Screw the R&L hand-threaded lag screw in the same direction into the column hole you drilled before until the cable is tight
Please screw the R&L hand-threaded screw into the wooden post at the same time! ! !
Tips:
Before turning the cable into the wooden post, make sure that the cable with the lag screw is firmly connected
Specification:
-Material: T316 stainless steel marine grade
-Suitable for cable diameter: 1/8"
The package includes:
40 x Left lag screw
40 x right lag screw
1 x Wrench multi-tool
1 x free drill bit